• The horizontal elements of this system are produced as “Pressed”.
•  Its erection and demount is quick and easy.
• At the flange (frame ring) points where horizontal element and prop are connected, direct intersection mouth is opened on horizontal element.
• Connection can be achieved to the flange (frame ring) from eight directions.
• It can be used for different dimensions horizontally and vertically.
• It is generally used for facade scaffolding for indoor installation, decoration and restoration works.
•  It can also be used as load-bearing (for light loads) under formworks having floor thickness of 11-12 cm.
•  It has the facility to conform to flanges on the props for any kind of facade design.
• The vertical and horizontal elements of the system are produced from TSE Certified standard pipes having the THICKNESS of 3 mm and 2.5 mm respectively with the diameter of 48.3mm.
• The wedges have 7 mm THICKNESS.
  

The elements constituting the system can optionally be:

•  Painted with dipping,
• Painted with anodic oxidation paint
• Electro galvanized
• Hot-dip galvanized
  

Note: On condition that it is paid for, the systems can be painted in desired colors.

The elements constituting the system:

• Vertical element
• Horizontal element
• Lower universal jack and jack nut
• Upper universal jack and jack nut
• Coupler element
• Base jack
• Metal walk board
• Metal ladder
• Fixed bearer
• Adjustable bearer
• Console

Horizontal (Ledger) Element (Pressed)