- Horizontal elements of this system are produced as “Ledger End Steel Casting Head”.
- Its erection and demount is quick and easy.
- At the flange (frame ring) points where horizontal element and prop are connected, the heads assembled to the horizontal element as Steel Casting increase load bearing strength.
- Connection can be provided to the flange (frame ring) from eight directions.
- It can be used for different dimensions horizontally and vertically.
- Its load-bearing capacity is higher compared to Pressed and WELDED COUPLING systems.
- While it could generally be preferred as facade scaffolding, it could also be used for indoor installation, decoration and restoration (renewal) works.
- In addition, it could also be used as formwork supporting scaffolding under the floors (moderate weight) easily.
- It has the facility to comply with any kind of facade designs and floors and beams thanks to its flanges on the vertical elements.
- The vertical and horizontal elements of the system are produced from TSE Certified standard pipes having the thickness of 3 mm and 2.5 mm respectively with the diameter of 48.3mm. The wedges have 6 mm thickness
The elements constituting the system can optionally be:
- Painted with dipping,
- Painted with anodic oxidation paint
- Electro galvanized
- Hot-dip galvanized
Note: On condition that it is paid for, the systems can be painted in desired colors.
- The elements constituting the system:
- Props (Vertical element)
- Horizontal element
- Lower universal jack and jack nut
- Upper universal jack and jack nut
- Connection element
- Base jack
- Metal walk board
- Metal ladder
- Fixed bearer
- Adjustable bearer
- Console
|
Horizontal Element (Ledger End Casting Head)
TECHNICAL PROPERTIES
|
Product Code |
Length (mm) |
Pipe Diameter
|
Pipe Thickness |
Weight
(kg) |
I-KADBY–500 |
500 |
48 mm |
2,5 mm |
2,5 |
I-KADBY–700 |
700 |
48 mm |
2,5 mm |
3 |
I-KADBY–1000 |
1000 |
48 mm |
2,5 mm |
4 |
I-KADBY–1500 |
1500 |
48 mm |
2,5 mm |
5 |
I-KADBY–2000 |
2000 |
48 mm |
2,5 mm |
7 |
I-KADBY–2500 |
2500 |
48 mm |
2,5 mm |
8 |
I-KADBY–3000 |
3000 |
48 mm |
2,5 mm |
9,5 |
Horizontal Element (Ledger End Casting Head)
|