Cup-Lock Supporting Scaffolding
- It is used as load-bearing scaffold under floor formwork
- This system provides economy by being used as a working scaffold for further stages.
- As a rigid system emerged thanks to connection of horizontal and vertical elements, load-bearing capacity is high and secure.
- Cup-lock distances on the vertical elements are 100 cm and these distances can be 50 cm according to load capacity.
- Horizontal elements can be used for these distances according to load to be taken over.
- The cups are produced of 5 mm sheet and they are connected to the vertical elements by welding.
- On these cups, there are mobile cups which are produced as Sphero casting and to which horizontal elements connect.
- The props are connected to each other through vertical connection elements.
- Load-bearing capacity is higher compared to other Flange Systems.
- It provides secure and quick erection facility. Interconnection of horizontal and vertical elements is achieved easily without the need of elements such as wedges and nuts etc.
- Installation and demount is practical thanks to cups on the vertical elements.
- Vertical elements (props) are made of TSE certified standard pipes which are 48 mm in diameter and 3 mm in thickness, and horizontal elements 48 mm in diameter and 2,5 mm in thickness.
- In the production, TSE certified standard pipes with 48mm diameter are used.
The elements constituting the system can optionally be:
- Painted with dipping,
- Painted with anodic oxidation paint
- Electro galvanized
- Hot-dip galvanized
Note: On condition that it is paid for, the systems can be painted in desired colors.
The elements constituting the system:
- Vertical element
- Horizontal element
- Lower universal jack and jack nut
- Lower universal jack and jack nut
- Connection tool for vertical elements
- Beam Supporting element
- Console
|