- Horizontal elements of this system are produced as “Ledger End Welded Coupling Head”.
- Its erection and demount is quick and easy.
- At the flange (frame ring) points where the horizontal element and prop interlock, the heads, which are assembled to the horizontal element as welded coupling, increase load bearing strength.
- Connection can be achieved to the flange (frame ring) from eight directions.
- It can be used for different dimensions horizontally and vertically.
- Its load-bearing capacity is higher compared to pressed system.
- While it could generally be preferred as facade scaffolding, it could also be used for indoor installation, decoration and restoration (renewal) works.
- In addition, it could also be used as formwork supporting scaffolding under the floor (moderate weight) easily.
- It has the facility to comply with any kind of facade and floor and lower beam designs thanks to its flanges on the props.
- The vertical and horizontal elements of the system are produced from TSE Certified standard pipes having the thickness of 3 mm and 2.5 mm respectively with the diameter of 48.3mm.
- The wedges have 6 mm thickness.
The elements constituting the system can optionally be:
- Painted with dipping,
- Painted with anodic oxidation paint
- Electro galvanized
- Hot-dip galvanized
Note: On condition it is paid for, the systems can be painted in desired colors
The elements constituting the system:
- Vertical element
- Horizontal element
- Lower universal jack and jack nut
- Upper universal jack and jack nut
- Connection element
- Base jack
- Metal walk board
- Metal ladder
- Fixed bearer
- Adjustable bearer
- Console
- Ledger End Facade Scaffolding System Elements
|
Ledger End Scaffolding System Elements
TECHNICAL PROPERTIES
|
Product Code
|
Length (mm) |
Pipe Diameter
|
Pipe Thickness
|
Weight (kg) |
I-KAMKBY–500 |
500 |
48 mm |
2,5 mm |
1,7 |
I-KAMKBY–700 |
700 |
48 mm |
2,5 mm |
2,5 |
I-KAMKBY–1000 |
1000 |
48 mm |
2,5 mm |
3,2 |
I-KAMKBY–1500 |
1500 |
48 mm |
2,5 mm |
4,6 |
I-KAMKBY–2000 |
2000 |
48 mm |
2,5 mm |
6,0 |
I-KAMKBY–2500 |
2500 |
48 mm |
2,5 mm |
7,5 |
I-KAMKBY–3000 |
3000 |
48 mm |
2,5 mm |
8,9 |
|